| PROPERTY | TEST METHOD PART 2 | PROPERTY OR ATTRIBUTES | UNITS | TEST REQUIREMENTS | TEST |
|---|---|---|---|---|---|
| Thickness | 4 | Maximum variation | mm | +0.10-0.10 | +0.04 |
| Warping | 5 | Maximum warp | mm | 120 | 0.15 |
| Resistance to surface wear | 6 | Wear resistance | Revs(min) IP FP | >150>350 | 200600 |
| Resistance to immersion in boiling water | 7 | Mass increase thickness appearance | %[max]%[max]Rating | 10 124 |
5.464.115 |
| Resistance to dry heat | 8 | Appearance other finish | Rating | 4 | 4 |
| Dimensional stability at elevated temperatures | 9 | Dimensional change | %CM%M | 1.05-0.55 | 0.700.30 |
| Resistance to impact by small diameter ball | 10 | Spring face | M(min) | >20 | >20 |
| Resistance to cracking | 11 | Susceptibility | Rating(not worse than) | 4 | 5 |
| Resistance to scratching | 13 | Load | n(min) | >2.0 | >7.0 |
| Resistance to scratching | 14 | Load | n(min) | 5 | 5.5 |
| Resistance to staining | 15 | Appearance Group 1 & 2Group 3 & 4 | Rating(not worse than) | 3 | 5,5.4,5 |
| Resistance to colour change in xenon arc light | 16 | Wool standard | min | 6 | >6 |
| Resistance to cigarette burns | 18 | Appearance | Rating(not worse than) | Brand A 3Brand B 3Brand C 3 | 344 |
| Resistance to steam | 24 | Appearance | Rating((not worse than) | 3 | 5 |
Grades
General and fire retardant [FR]
Types
Standard, post forming, compact, cabinet liner, backer
Sizes
2440 mm * 1220 mm[8’*4’] , 3050 mm * 1220 mm[10’ * 4’] [obtainable from oversized sheet]
Thickness
1.00mm [any other available on request]
Surface finishes
OG-Gloss
OM-Matt
SS-Satin saude
VO-Vertos,
HO-Orizon
OL-Hairline
TL-Trunkline
RW-Rainwood
RG-Rugas
RB-Ruban
RR-Riverra
OW-Waves
DW-Drywood
BK-Brick wood
AW-Ashwood
SG-Super Gloss
TW-Trunk wood
MZ-Maze
CL-Curtain line
HW-Horizontal wood
PS-Pinstripe
CN-Channel
Care & maintenance
Cleaning should be carried out with a soft moist cloth and warm soap solution. Do not use detergents containing abrasive particles or excess soda.
Note
Samples presented are indicative of colour, pattern and surface finish but not the actual thickness. All metallic patterns 2000 series are recommended for vertical applications only. Information and samples for special cabinet liners, phenolic boards, special purpose compact laminates and post forming laminates are available on request. Phone / fax /email for larger samples of your choice.
Disclaimer
Customer are advised to reconfirm selected laminate colours when placing orders, as our liability does not include claims arising form sample chip pasting error.
Limited Warranty
Bloom Dekor warrants that its products are reasonably free from manufracturing defects. It excludeds damage resulting from accidents, abuse or lack of care, improper use and/or anyy alteration. It si recommended that the product must be inspected prior to installation and our liability will be limited to the extent of the cost of product only. The comapany does not assume obligations or liabilites arising from the furnishing, sale, installation or repair, user or subsequent sale of any product, to any person or entity.